IPB

Welcome Guest ( Log In | Register )

6 Pages V   1 2 3 > »   
Reply to this topicStart new topic
> New drag times with updated ECU *BONE STOCK RECORD!
HybridMT
post Feb 4 2009, 10:26 PM
Post #1


R32 Member
**

Group: Members
Posts: 227
Joined: 18-June 08
Member No.: 13,517



Well, the track conditions were horrible, so never got a chance to get an accurate run in RRR. Track surface was bitter cold tonight, so VDC would come on every time, even without launching. I ended up making a run in R R off and hit 11.347 @ 120.85 mph! This is in a bone stock GTR after the ecu update on stock dunlops, with pump gas and absolutely no weight reduction! With the new ECU update, launch revs to 3000 rpms instead of 4500, which did not seem at all harsh on the car. Take off was silky smooth with absolutely no wheel hop. I recommend all 09 GTR owners get the ECU update!

This was today at No Problem Raceway in Belle Rose, Louisiana, complete time slip below. Good job to Nissan for the update and very special thanks to Gary, GTR Master Tech at Price Leblanc Nissan, for the reflash this morning and coming to the track with me.

R/T .082
60' 1.690
330 4.742
1/8 7.282
mph 95.43
1000 9.479
1/4 11.347
MPH 120.85

I absolutely love this car! All you locals, see you at the next event! www.IMPORTFACEOFF.net



To any magazines who read this thread, feel free to call the track owner to verify my time. It was done at No Problem Raceway in Belle Rose, Louisiana on 2/4/09 @ 6:09 pm.

Pat Joffrion, No Problem Raceway owner
Ph: 985-369-3692
www.NoProblemRaceway.com

Also, Gary, the GTR Master Tech at Price Leblanc Nissan in Gonzales, Louisiana (ph: 225-743-8100) was also there and can verify I had the update that morning and was running on the stock dunlops.

I have time slip in hand and will get it scanned as soon as possible. This time can be duplicated by any GTR under the same conditions.

This post has been edited by HybridMT: Feb 6 2009, 11:31 AM
Go to the top of the page
 
+Quote Post
MC
post Feb 4 2009, 10:30 PM
Post #2


NAGTROC CO-FOUNDER
******

Group: Administrator
Posts: 5,211
Joined: 1-August 04
From: NC
Member No.: 1,578



damn... i knew it would make a huge difference


--------------------
2009 Black Obsidian GT-R #0278. Powered by HKS. Legamax Exhaust. Racepipe. Hybrid filters
1/4 mile 11.34 @ 122.3
Go to the top of the page
 
+Quote Post
toprpm
post Feb 4 2009, 10:35 PM
Post #3


R33 Member
***

Group: Members
Posts: 631
Joined: 11-October 08
From: UAE,ALAIN
Member No.: 14,484



Nice numbers

still waiting my dealer to get the update. for sure i will for it.

Nice pic too. biggrin.gif
Go to the top of the page
 
+Quote Post
Chinaski
post Feb 4 2009, 10:37 PM
Post #4


R33 Member
***

Group: Members
Posts: 847
Joined: 1-May 07
From: NY
Member No.: 11,710



QUOTE (MC @ Feb 4 2009, 11:30 PM) *
damn... i knew it would make a huge difference


Unfortunately it was done with VDC-off LC so that negates the purpose of the update. Hopefully during better conditions he can run again with a warranty-legal VDC-on LC and give us a time.


--------------------
2009 GT-R Premium Black/Black
2008 A4 Gray/Gray
Go to the top of the page
 
+Quote Post
gotboost
post Feb 4 2009, 10:37 PM
Post #5


R34 Member
****

Group: Members
Posts: 1,202
Joined: 27-November 08
From: oregon
Member No.: 14,947



Wow, that's impressive.

I wonder what you'd do with a Cobb AP re-flash

What build date is your car?


--------------------
'09 GT-R titanium: Cobb AP custom tuned by Tim Bailey @ Cobb/Surgelne, HKS resonated midpipe, T1R catback, Deatschwerks 950cc inj., GFB BOV's, Walbro 255 fuel pumps, Custom intake system built by Gotboost, T1R spring kit, Stillen sway bars, Perrin wheel spacers, OZ Racing Botticelli III's w/ Dunlop SP 600's, Willall WR35TM......570WHP/535WTQ Mustang @ 16.5psi peak on 92 octane.........E85 Dyno results to come soon
'95 Porsche 993 supercharged & intercooled
'08 Acura MDX Sport
'05 GMC Sierra crew 4x4 modded Diesel
'08 Hotrails sandrail w/Acura 3.7 turbo and intercooled (550 hp, 1800lb. E-Ticket ride) www.hotrailssandcars.com
997 GT-3RS will be the next stable mate


Go to the top of the page
 
+Quote Post
FikseGTS
post Feb 4 2009, 10:39 PM
Post #6


R32 Member
**

Group: Members
Posts: 470
Joined: 23-September 08
Member No.: 14,256



sweeet! 1.69 short time with no launch control?


if you did this in RR off, then wouldn't that be using launch control?

edit:, what were your short times in RRR?

This post has been edited by FikseGTS: Feb 4 2009, 10:42 PM


--------------------
Go to the top of the page
 
+Quote Post
MC
post Feb 4 2009, 10:42 PM
Post #7


NAGTROC CO-FOUNDER
******

Group: Administrator
Posts: 5,211
Joined: 1-August 04
From: NC
Member No.: 1,578



no it still holds the 3K rpm instead of the 4500 so its still the new way. only difference was VDC wont come on if it detects wheel spin if it was warmer his time would have been the same as its only faster with VDC off when you get interference with VDC on. other than that the two methiods work identical


--------------------
2009 Black Obsidian GT-R #0278. Powered by HKS. Legamax Exhaust. Racepipe. Hybrid filters
1/4 mile 11.34 @ 122.3
Go to the top of the page
 
+Quote Post
HybridMT
post Feb 4 2009, 10:52 PM
Post #8


R32 Member
**

Group: Members
Posts: 227
Joined: 18-June 08
Member No.: 13,517



QUOTE (MC @ Feb 4 2009, 10:42 PM) *
no it still holds the 3K rpm instead of the 4500 so its still the new way. only difference was VDC wont come on if it detects wheel spin if it was warmer his time would have been the same as its only faster with VDC off when you get interference with VDC on. other than that the two methiods work identical


That's exactly right. You get the same 3k clutch dump with VDC on or off, only difference is VDC will take away power if there is too much wheel spin, which everyone was having tonight. I'm confident similar times can be hit in RRR with better track conditions because VDC will not come on to cut power. When I launched under the sun this afternoon on the street in RRR, VDC never came on.

This post has been edited by HybridMT: Feb 5 2009, 12:24 AM
Go to the top of the page
 
+Quote Post
MC
post Feb 4 2009, 11:15 PM
Post #9


NAGTROC CO-FOUNDER
******

Group: Administrator
Posts: 5,211
Joined: 1-August 04
From: NC
Member No.: 1,578



also did you notice if you stomp it hard it goes to 3.5K for a short period of time. i bet you might even improve a little if you let off the brake before it died down to 3


its funny you posted about the traction about a minute before you posted i posted this:


QUOTE (MC @ Feb 5 2009, 12:15 AM) *
ok guys i got some more findings for you and its a little dissapointing but not suprising.. here goes

so its 22 degrees tonight here and i thought with the cold air i would go out and see if i could knock a tenth or 2 off that 3.8 for us.... so i set up the car RRR manual and stomp it hard all the way to 3.5K and catch it befores it dies down. im off and the rear tires dont hook up on the cold pavement and VDC R goes crazy cutting my power and blowing the run. im like ok lets try it at 3K and same thing happens about a half second into the run.... out of a dozen or so of these attempts the last few days.... this was the first time VDC ever interfered with one of launches... but again its bitter cold here and traction issues are to be expected (tires were all 29PSI by the way) but i didnt think VDC R would have babysit as quick as it did

so for tonight its a scratch. this weekend its gonna be 60 so i'll try again.

but yeah atleast we learned tonight that it looks like nissan has the VDC to cut on at almost ANY wheel spin. so even when it warms up it might be better to launch at the 3K than the 3.5K and get VDC coming on


--------------------
2009 Black Obsidian GT-R #0278. Powered by HKS. Legamax Exhaust. Racepipe. Hybrid filters
1/4 mile 11.34 @ 122.3
Go to the top of the page
 
+Quote Post
HybridMT
post Feb 4 2009, 11:32 PM
Post #10


R32 Member
**

Group: Members
Posts: 227
Joined: 18-June 08
Member No.: 13,517



never went up to 3500 for me
Go to the top of the page
 
+Quote Post
Dynomite
post Feb 4 2009, 11:36 PM
Post #11


NAGTROC Newbie
*

Group: Members
Posts: 50
Joined: 15-November 08
From: San Antonio, TX
Member No.: 14,842



1.69 60ft is incredible! My car spins in 1st all the way. I can't wait to get the update now. I wonder if the Dunlops are better than the Bridgstones for drag racing?

This post has been edited by Dynomite: Feb 4 2009, 11:38 PM


--------------------
2009 GT-R Premium Blk/Blk Custom Cobb Stage 2, CBRD Y-Pipe, KN filters, GFB BOV
11.55 @ 121.75 Bone Stock LC1 55 degrees
11.72 @ 122.20 Bone Stock no LC1 60 degrees
11.52 @ 123.69 With Cobb Stage 1 KN filters LC2 85 degrees
11.20 @ 125.10 Cobb Stage 2 CBRD Y-Pipe LC2 65 degrees
Go to the top of the page
 
+Quote Post
MC
post Feb 4 2009, 11:36 PM
Post #12


NAGTROC CO-FOUNDER
******

Group: Administrator
Posts: 5,211
Joined: 1-August 04
From: NC
Member No.: 1,578



oh yeah.? hmm well next time you get a chance. stomp it like your gonna put a hole in the floorboard and see if it does.


--------------------
2009 Black Obsidian GT-R #0278. Powered by HKS. Legamax Exhaust. Racepipe. Hybrid filters
1/4 mile 11.34 @ 122.3
Go to the top of the page
 
+Quote Post
HybridMT
post Feb 4 2009, 11:39 PM
Post #13


R32 Member
**

Group: Members
Posts: 227
Joined: 18-June 08
Member No.: 13,517



will do.

yes, the dunlops are stickier.
Go to the top of the page
 
+Quote Post
HybridMT
post Feb 5 2009, 12:28 AM
Post #14


R32 Member
**

Group: Members
Posts: 227
Joined: 18-June 08
Member No.: 13,517



I'd rather a 3k launch than 3500 though. Easier launches are better for the car in the long run.
Go to the top of the page
 
+Quote Post
MC
post Feb 5 2009, 01:01 AM
Post #15


NAGTROC CO-FOUNDER
******

Group: Administrator
Posts: 5,211
Joined: 1-August 04
From: NC
Member No.: 1,578



oh yeah i agree i wouldnt do it everytime im just curious if it affects your 1/4 at all mainly the 60ft


--------------------
2009 Black Obsidian GT-R #0278. Powered by HKS. Legamax Exhaust. Racepipe. Hybrid filters
1/4 mile 11.34 @ 122.3
Go to the top of the page
 
+Quote Post
Silver Surfer
post Feb 5 2009, 01:17 AM
Post #16


R32 Member
**

Group: Members
Posts: 256
Joined: 20-March 08
Member No.: 13,152



Nice run!!

http://www.wallaceracing.com/0-60_equation.php


0-60mph= 2.88 seconds! WOW!! GT-R seems to like the Dunlops more than the Bridestones at the track, and at the strip.
Go to the top of the page
 
+Quote Post
HybridMT
post Feb 5 2009, 01:25 AM
Post #17


R32 Member
**

Group: Members
Posts: 227
Joined: 18-June 08
Member No.: 13,517



/\ damn! Funny link too as my last name is WALLACE.

After the pass said to myself, that felt like an 11.5, maybe even an 11.4! LOL

This post has been edited by HybridMT: Feb 5 2009, 01:30 AM
Go to the top of the page
 
+Quote Post
HybridMT
post Feb 5 2009, 01:28 AM
Post #18


R32 Member
**

Group: Members
Posts: 227
Joined: 18-June 08
Member No.: 13,517



oh yeh, the pass was done in AUTO
Go to the top of the page
 
+Quote Post
GODZILLA_GTR
post Feb 5 2009, 03:18 AM
Post #19


R32 Member
**

Group: Members
Posts: 298
Joined: 30-June 08
From: SoCal
Member No.: 13,607



irock.gif yourock.gif ohsnap.gif very amazing run. you were the one that got 11.6 without LC as well. your GTR is very special my friend. lets see what others will get at the strip with the new update.


--------------------
2009 Ivory Pearl GTR:
-Front JDM Clear Markers (w/yellow Piaa bulbs)
-Rear MCR LED red side markers
-V-LEDs inside and out
-Swift springs
-HRE C90 20x10, 20x11 (silver) w/stock tires
-HKS Kansai midpipe
-Titek Titanium exhaust
-Titek Carbon Fiber atenna cover
-Painted lip

-20% tint
Go to the top of the page
 
+Quote Post
jaspergtr
post Feb 5 2009, 07:30 AM
Post #20


R34 Member
****

Group: Members
Posts: 1,529
Joined: 27-February 08
Member No.: 13,005



hybrid - nice job!

was wondering if you could try it in 'r'?

basically, i found out (from watching my wife get an 11.4) that my track sucks for traction... you appear to be setting the bar for stock gt-r's. your data is always appreciated - looks like fun too... irock.gif


--------------------
Cobb Stage 1 v2.0
AP slotted rotors (Fr)
Carbotech XP8 pads (Fr)
Stainless steel brake lines
Motul RBF600
Clear corners
Clear bra - full hood, bumper, full fender, side mirrors
Go to the top of the page
 
+Quote Post

6 Pages V   1 2 3 > » 
Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 8th February 2010 - 05:45 PM
Design and Concept by Attitude
Valid XHTML 1.0 Transitional
Bridged By IpbWiki: Integration Of Invision Power Board and MediaWiki © GlobalSoft