hamanigtr
Mar 4 2010, 12:42 PM
hey guys just got this code engine controle unit dtc on my cobb and on the dash screen service engine soon vist dealer
GT3240x2
Mar 4 2010, 12:49 PM
whats the code#?
hamanigtr
Mar 4 2010, 01:35 PM
there was another code under it but i didnt get it the rest was for the catless y pipe and outlet pipe
hamanigtr
Mar 4 2010, 01:37 PM
off topic question am running on stage 2 cobb BL 640 what the max boost i can run on 93oct?
GT3240x2
Mar 4 2010, 05:34 PM
Bring down your car here to Bahrain for a custom tune, or get an eTune from Zuhair at Boost Logic or any other tuner. With that setup you HAVE to run a custom map. And for maxing out the boost, you need 800cc or 950cc injectors for the setup to run correctly.
hamanigtr
Mar 5 2010, 05:43 AM
this is the code that i got p2a03
GhostofX
Mar 5 2010, 07:32 AM
I'm not sure if
this page has all the codes but i couldn't find p2a03 for you.
hamanigtr
Mar 5 2010, 08:26 AM
ya its the catless midpipe and y pipe but whats engine controle unit dtc's
COBB Tuning
Mar 9 2010, 12:44 PM
That is an O2 sensor code. You probably have bad o2 sensors... Sadly, these units are not cheap about $400 each. Sensor 1 Bank 2 is probably rear O2 sensor and since the GT-R has 4 widebands... They do go bad especially if you have to reef them out of the downpipes etc when you install new exhaust components, for some reason this kills them too.
Travis
COBB Tuning
NickTO
Mar 9 2010, 02:52 PM
Actually, they have 2 wideband (primaries) and 2 narrowbands (HO2S2 after the cats)
QUOTE (COBB Tuning @ Mar 9 2010, 01:44 PM)

That is an O2 sensor code. You probably have bad o2 sensors... Sadly, these units are not cheap about $400 each. Sensor 1 Bank 2 is probably rear O2 sensor and since the GT-R has 4 widebands... They do go bad especially if you have to reef them out of the downpipes etc when you install new exhaust components, for some reason this kills them too.
Travis
COBB Tuning
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.