Lowering 1" front and rear. they're easy on the wallet
Spring rate:
Front 5.4kg to 15kg, 302lbs - 840lbs
Rear: 2.4kg to 7.0kg, 134lbs - 392lbs
The stabilizer bar's bends "take up" was another newly studied dynamic. The difference in density of the material was in the bend which effects durability and stiffness as well as the torsion rate. Swift developed a similar composite to the Swift springs for the stabilizers. It offered great durability and an ideal level of flex.
The final design hurtle was the selection of bushing material. Swift tested a large selection of materials and found that depending on application, different hardness was ideal. Swift found the difference to be so profound that they use the most ideal hardness for the application. -Front 34mm w/ 8mm side wall hallow and rear 16mm
-1 Solid Piece Design from end to end.
-Same R&D and successful results as their springs.
-Density and bends that are made for the vehicle.
-Upgraded High Grade Bushings with proper durometer strength.
-Powder coated green to prevent any rust.
