Logo name
Personal tools

Specifications (NPK)

From NAGTROC

image:npk - specs.gif

Contents

Main Specifications

Specifications 4WD
VR38DETT
GT-R / GT-R Black edition / GT-R Premium edition
MODEL Nissan CBA-R35
TRANSMISSION TYPE
GR6 Dual Clutch Transmission
DIMENSIONS
Overall length mm 4655
Overall width mm 1895
Overall height mm 1370
Interior dimensions (length x width x height) mm 1750x1475x1095
Wheelbase mm 2780
Tread Front / Back mm 1590/1600
Min. ground clearance mm 110
WEIGHT/CAPACITY
Curb weight kg 1740(*1)
Seating capacity persons 4(2+2)
Gross Vehicle Weight kg 1960(*1)
PERFORMANCE
Min. turning radius (curb to curb) m 5.7
Fuel consumption rate - 10-15mode (MLIT screening value) km/L 8.2
Main Emission Control System Variable valve timing
OTHERS
Drive system 4WD
Steering Electronic controlled power-assist rack and pinion
Suspension Front/Back Independent double wishbone suspension / Independent multi-link suspension
Braking System Front/Back Ventilated brake disc / Ventilated brake disc
Tire Size Front/Back 255/40ZRF20 97 / 285/35ZRF20 100Y


Engine Specifications

image:press-kit-specs-1a_02.jpg


Gear Specifications

image:press-kit-specs-1a_03.jpg


Please use the fuel listed as the 'Recommended Fuel' for this vehicle. The use of other fuel types may lead to vehicle trouble or failure. Please note, any trouble or failure caused by the use of other fuel types, will not guaranteed free of charge.

  • The engine power output values indicated in this catalog are all net power output values.
  • Engine power output can be indicated as 'Net power output' or 'Gross power output'. 'Gross' values are estimations of power output of the engine alone. 'Net' values are estimations of when the engine is assembled onto the vehicle. For estimations of the same gasoline engines, 'Net' values are approximately 15% lower than 'Gross' values according to JAMA research.
  • Please use unleaded premium gasoline for this vehicle. If unleaded premium gasoline is inaccessible, regular gasoline can also be used, although it may lead to engine power output reduction.

<SI unit conversion value> The unit conversion for converting conventional power output unit PS and unit for engine torque kgm to SI unit is as follows. The value is indicated only as and rounded off to the nearest whole number. 1PS=0.7355kW 1kgm=9.80665Nm

Dimensions

This page was last modified 12:09, 28 October 2007.  This page has been accessed 5,154 times.  Disclaimers